Auricast Manuals· User Manual

Signing In

Auricast Air runs in a web browser. You open the station's address, sign in, and the On Air screen appears. This page covers signing in, the second step that is sometimes asked for, and changing your password.

Studio PCs Sign In By Themselves

Some PCs are set up by your Admin as trusted studio PCs. On one of those, you do not see a sign-in page at all: the screen opens straight to On Air and everything you do is recorded under that PC's name. Everything else on this page applies to any other PC, including a laptop at home or a phone.

Signing In

  1. Open the station's address in your browser.
  2. Enter your Name and Password.
  3. Press Sign In.

If the name or the password is wrong, you get the same message either way, after a short pause. That is deliberate. Ask your Admin if you have forgotten either.

You stay signed in while you use the screens. After 12 hours without any activity the session ends and you sign in again. Restarting the Auricast service on the station also signs everyone out.

The Code From Your Authenticator App

On the station's own network you only need your name and password. From outside the station (at home, at a remote, on a phone), Auricast also asks for a six-digit code from an authenticator app such as Google Authenticator, Microsoft Authenticator or 1Password.

If you already have the app set up, the page changes to Enter Your Code. Type the six digits shown for your account and press Verify And Sign In. The code changes every 30 seconds, so enter the current one.

If this is your first time from outside, you see Set Up Your Second Factor:

  1. Scan the QR code with your authenticator app. On a phone, Open In Authenticator App does the same thing. If you cannot scan it, type the key shown under the code into the app instead.
  2. Enter the six-digit code the app now shows.
  3. Press Verify And Sign In.

From then on, signing in from outside asks for the code. Press Start Again if you want to go back to the name and password step.

Your Admin can mark individual users as not asked for a code from outside. Admins themselves are always asked. If you are not sure whether you should be asked, check with your Admin.

Changing Your Password

Your name, your role and two buttons are at the right of the bottom bar: Password and Sign Out. (Trusted studio PCs show neither, because nobody signs in there.)

  1. Press Password.
  2. Enter your Current password.
  3. Enter the New password twice (The same again).
  4. Press Change Password, or Cancel to go back.

A new password has to follow the station's rules, which are the ones the FCC sets for broadcast stations:

If a password does not meet the rules, Auricast tells you what is wrong and keeps the old one.

When You Are Made To Change It

If your password no longer meets the rules, Auricast shows the Change Password page as soon as you sign in and does not let you go on until you choose a new one. The only other choice is Sign Out.

Signing Out

Press Sign Out at the bottom right when you leave a shared PC. Anyone who uses the PC after you would otherwise act as you, and every action on air is logged with the name of whoever did it.

If You Cannot Sign In

What you seeWhat to do
The name or password is refusedCheck caps lock and try again. If you still cannot, ask your Admin to reset it.
The code is refusedCheck that your phone's clock is correct and enter the next code it shows.
RECONNECTING in the top barThe page has lost its link to the station. It reconnects by itself; see The Header And Status.